'11-'14 Ford Mustang iPad Mount (OtterBox Req'd) - image

Files (1)

iPadMini4Otterbox.stl

STL

38.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
iPadMini4Otterbox.stl	Primary model	38.3 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment of neodymium magnets with pre-cut slots

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

'11-'14 Ford Mustang iPad Mount (OtterBox Req'd)

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This was a REMIX off of adas82's original design. This variant was made to allow the user to keep their iPad Mini 4 in the otterbox and still mount it on an '11-'14 Ford Mustang dash. A charging channel has been added to the left side of the design. A removal channel has been added to the right side of the design for ease of iPad removal. Otterbox: This mount was designed to work with the Defender Series case for the iPad mini 4. https://www.otterbox.com/en-us/ipad-mini-4/defender-series-case/apl2-ipad-mini-4.html Neodymium Magnets: They must be mounted behind the Radio Dash plate and alignment with the pre-cut magnet slots on the iPad Mini mount is critical. https://www.amazon.com/Powerful-Neodymium-Magnets-Rare-Earth-Magnet/dp/B07DFZH4WT?ref_=ast_bbp_dp Printer: TEVO Nereus.