65 Mustang Dash
Files (10)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
jeff ranger (jranger615)Designers selling from the US, Canada, the UK, the EU/EEA (except Iceland), Switzerland and Gibraltar can also list separate original designs for sale and receive 80% of the listing price, paid out by Stripe in your local currency (conversion fees may apply). Claiming credits you here; it doesn't put this imported part up for sale.
Description
Designed for 3-3/8" and 2 1/16" Gauges with a flatter bezel. Blinkers/Bright light indicator is designed to use 12MM LEDS: https://www.amazon.com/gp/product/B071YQPGZ2 V6 Bezels now uploaded. ================================= Finally happy with the results and fitment. Ended up having to combine v2 and v5 to get the fitment right. This should be the final version other then possibly other iterations of it with different gauge setups * RetroBezelv5 - Using Cleanbase v5 =================================:::::So cleanup seems to have caused some issues with fitment. I am working to fix these....v2 is the best fitment at this time for the clean bezel/retro. I have altered v5 and will print it with the fixes of fitment to see if it resolves the problem. * Clean Bezel v5 - 4/1/20 - ================================= I have reconfigured the base with new trim and extended it over to the left more where the overhang was. This includes lot of clean up and straighter lines in the trim ring in general. I have not fully tested this setup yet as my first print failed due to filament issues. Will release the Corresponding Retro Bezel once i complete test fitting Retro Bezel v3 - Uses CleanBase v2 ================================= *CleanBase v2 ================================= Middle gauge cover widened with mustang logo, Left side piece made more solid, couple other little tweaks 3/16 *Clean Base - 3/8/20 ================================= Added A clean Base. Simply put, I cleaned up a lot of rough edges *Retro v2 - 3/6/20 ================================= Revised Gauge areas for to make them strong on the small gauges and also angled the front piece that covers the stock gauge cutout *Uploaded - 3/1/20 - Retro Bezel ================================= - Havent test printed this one yet but its designed with the v4 base *V4 ----- ================================= All mounting holes now work. I filled more gap on the left side top and flatten it out a bit....Still more smoothing and basic stuff to be done but at this point it is a fully functional base for the dash....I also removed the LED holes so everyone can do what they want *v3 ================================= Builds are still in process but it does fit....They are base plates for customization...I have more designs but im still trying to get the top mounting holes right and a few other little things to make it cleaner...Its rough in some areas so still needs work but wanted to share progress
Compatible Vehicles
Originally published on thingiverse.com by jeff ranger (jranger615) · License: CC BY 4.0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
