Files (1)

tachomount.stl

STL

138.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tachomount.stl	Mount / bracket	138.6 KB STL	Slice file	Slice file	Slice file	Ensure proper fit around the steering column before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Classic Mustang Tacho Mount

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this to replace ugly hose clamp type of mount that holds the external tachograph to the mustang steering column. This should fit perfectly 1965 and 1966 Ford Mustang - possibly later years too. It has a swivel designed to mount it to the steering column. You will need an M3 screw and nut for the swivel and M5 to clamp it around the column. Also another M5 to attach the actual tacho to the mount. Printing: I used a 30% fill with 3-4 layers for walls and seemed to work fine.