Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| NSX_lug_nut_cap_6.stl | Cover / cap | 32.8 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and supports unlikely, verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
19 mm Lug nut Cap NSX part
Shared by
3DPrintedCarPartDescription
If you have chrome lug nuts that don't look good with your rims, cover them with black (or body coloured!) covers. Note that, depending on your rim, you may need a needle-nose pliers in the car to remove them if you need to change your tire. Covers the bottom "acorn" section, unlike other designs, so you don't get a sliver of silver chrome showing. Does not need supports if printed vertically. Currently set for a lug nut length of 25 mm, but can be scaled for any lug length. Use PET or higher, PLA will melt in the sun.
Compatible Cars
Originally published on thingiverse.com by Timothy Turkstra (Pi-design) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
