NSX Window Regulator Repair Tool - image

Files (1)

Hugo_Regulator_Repair_Tool.stl

STL

57.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Hugo_Regulator_Repair_Tool.stl	Primary model	57.1 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

NSX Window Regulator Repair Tool

0 downloads58 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This tool will hold the springs compressed while you rebuild your NSX or Honda Accord window regulator (& many other Hondas...) such as when you perform Hugo's NSX Window Regulator Upgrade. When you're rebuilding, instead of clamping the regulator with C-clamps and trying to work around them, just compress the spring and pop this clip on to hold it. After assembly, remove the clips and the cables will be nicely tensioned! Note: you need 2 of these spring compressors, one for each cable.