2007 Toyota Car Visor Replacement - image

Files (2)

STEM_MODULE_4_Female.stl

STL

69.2 KB

STEM_MODULE_3_Receiver.stl

STL

61.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

12g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.29

Filament only at roughly $24/kg PETG / ASA

Print time

20m–34m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
STEM_MODULE_4_Female.stl	Printable file	69.2 KB STL	11g $0.27	12g $0.29	26g $0.63	Ensure a stable and level print bed for optimal results.
STEM_MODULE_3_Receiver.stl	Printable file	61.5 KB STL	11g $0.26	12g $0.28	25g $0.61	Ensure a stable and level print bed for optimal results.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2007 Toyota Car Visor Replacement

0 downloads262 views0 likes

Shared by

Alfred

Verified

Description

3 Part assembly. First part (visor attachment) slides over visor bracket attached to car. Second part slides over visor attachment and creates the rotation for the visor. This piece also has a slot to receive your custom made visor. I made my out of cardboard for now painted black.