Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tacoma_Red_Bull_Adapter_Improved.stl | Primary model | 70.0 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2018 Tacoma RedBull Cup Holder Adapter
Shared by
3DPrintedCarPartDescription
This is a Remix of UncleJessy's Chick-Fil-A dip adapter. This will fit an 8.4oz RedBull can and slide into your square cupholder of a 3rd Gen Tacoma (2016-2019 I believe). Mine is a 2018 Tacoma TRD Sport and it works for me. I have heard that ABS works better in cars, but I printed this in a temperature changing PLA so attempt to get a gradient from the heat of the truck to the cold of the can.
Compatible Cars
Originally published on thingiverse.com by Colten Marsden (Dresdens_Workshop) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
