5th Gen Toyota 4Runner Storage Cubby - image

Files (1)

4runner_Mini_Cubby_v4.stl

STL

13.2 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 35% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
4runner_Mini_Cubby_v4.stl	Primary model	13.2 KB STL	40g $0.95	50g $1.20	95g $2.27	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

5th Gen Toyota 4Runner Storage Cubby

0 downloads161 views0 likes

Shared by

Michael Chen

Verified

Description

This is a storage cubby for the worthless space in the dash next to the USB charger. The design is not perfect, so feel free to remix it and share. I printed this in PLA to prototype it, but I highly recommend you print in PETG or some other heat-resistant filament, so the summer heat does not warp the plastic. Printed with Hatchbox PLA at 0.20mm and 100% infill.