Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Speaker_Bracket_v17.stl | Mount / bracket | 0 B STL | 23g $0.55 | 25g $0.60 | 55g $1.32 | Ensure the print bed is level and clean for optimal adhesion. |
| Shield_v17.stl | Printable file | 0 B STL | 23g $0.55 | 25g $0.60 | 55g $1.32 | Ensure the print bed is level and clean for optimal adhesion. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
6.5" Toyota MR2 Spyder Speaker Bracket
Shared by
Michael ChenDescription
A simple 6.5" speaker bracket for some Toyotas, including the MR2 Spyder. I ran into issues with off-the-shelf brackets sticking out from the door too far. The design, particularly for the shield, is not perfect. I am currently successfully using the bracket without the dust shield in my 2003 MR2 Spyder. Modified Printrbot Simple Metal Use a filament that can tolerate high temperatures (ex: PETG or PC) It is possible to print on most 8"x8" beds with careful rotation of the bracket. 8.5º worked for me. You must glue the shield to the speaker frame if you wish to use it (I didn't).
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
