MR2 SW20 center mount cup holder - image

Files (1)

mr2_sw20_cup_holder_v2.stl

STL

230.8 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
mr2_sw20_cup_holder_v2.stl	Mount / bracket	230.8 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure a stable print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

MR2 SW20 center mount cup holder

0 downloads263 views0 likes

Shared by

Michael Chen

Verified

Description

This is a center console cup holder for the 1991-1999 SW20 Toyota MR2. This cupholder is designed to attach inside the supplemental center console between the driver's and passenger's seats. The OEM screws may be long enough to reach through to the factory screw locations used, but if not, two M4-0.7 x 16mm pan head fasteners can be used for the front two, and two #8 x 5/8" pan head Philips sheet metal screws will work for the rear two fasteners. The ones replaced are the factory hinge at the back and the screws holding on the latch clasp at the front. If you do end up using this, smash that like button, and if you can, please snap a pick and drop a comment below. I love the MR2 community and hope this helps some folks add one more nice touch to their rides. Cheers!