Toyota MR2 Spyder Shock Tower Cover - image

Files (2)

shock_tower_cover.stl

STL

50.0 KB

shock_tower_cover_with_logo.stl

STL

207.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
shock_tower_cover.stl	Cover / cap	50.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
shock_tower_cover_with_logo.stl	Cover / cap	207.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Toyota MR2 Spyder Shock Tower Cover

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Toyota MR2 Spyder Shock Tower Cover This is a part that is commonly lost on these cars, so I designed a replacement after the OEM part. There is a file with and without the MR2 logo. This part fits well!