a much better jeep climate control pannel - image

Files (5)

jeep_wrangler_climate_control_pannel.stl

STL

289.5 KB

jeep_wrangler_climate_control_pannel_complete.stl

STL

304.4 KB

jeep_wrangler_climate_control_pannel_side_tab_left.stl

STL

15.7 KB

jeep_wrangler_climate_control_pannel_side_tab_right.stl

STL

14.9 KB

jeep_wrangler_climate_control_pannel_side_tabs.stl

STL

30.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

5 model files

Typical selected file

19g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.46

Filament only at roughly $24/kg PETG / ASA

Print time

33m–54m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
jeep_wrangler_climate_control_pannel.stl	Printable file	289.5 KB STL	17g $0.42	19g $0.45	41g $0.99	Ensure proper orientation in the slicer to minimize supports
jeep_wrangler_climate_control_pannel_complete.stl	Printable file	304.4 KB STL	18g $0.42	19g $0.46	42g $1.01	Ensure proper orientation in the slicer to minimize supports
jeep_wrangler_climate_control_pannel_side_tab_left.stl	Choose left variant	15.7 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.
jeep_wrangler_climate_control_pannel_side_tab_right.stl	Choose right variant	14.9 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.
jeep_wrangler_climate_control_pannel_side_tabs.stl	Printable file	30.6 KB STL	9g $0.22	10g $0.24	22g $0.52	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

a much better jeep climate control pannel

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

when the blower motor on your jeep goes out it doesn't go out peacefully. it takes out 2 switches, a resistor block connector, sometimes even a resistor block and all the connectors for the switches in the control panel. this part takes $50 worth of toasted parts and turns it into $12 it makes it unnecessary to replace the 2 bad switches and connectors. In the process also makes your car look like a badass spy car, who doesn't want that? the first file is the complete part and the other one is split to fit better on a 200*200 build platform.

Compatible Cars

Jeep (all models)

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by noah (YeahButItWorks) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.