Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ashtray_panel_53mm_fusion_Final.obj | Primary model | 171.8 KB OBJ | Slice file | Slice file | Slice file | Print with the top plate facing upwards for a better finish |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ashtray Gaugepod (52mm) for BMW Z4
Shared by
3DPrintedCarPartDescription
This is a gauge pod for the ashtray of a BMW Z4 E85. Print standing for a better finish at the top plate. Print at 0.2 or lower for better results. After the print: 1. Cut off the supports 2. Remove the ashtray from your Z4 there are many videos on how to do so. 3. In order to fit the gauge pod into the ashtray, you need to cut out a bit of plastic. (If you want to reverse your installation don't worry an OEM ashtray panel is around 60$). 4. Fit the print inside the lower part of the ashtray panel. 5. Done I'm not a professional 3D Artist just a car guy in need for a gauge pod.
Compatible Cars
Originally published on thingiverse.com by Paul Wallner (Sirnether) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
