BMW Z4 (E85) Fire Extinguisher Bracket - image

Files (1)

BMW_FireExtinguisher.stl

STL

3.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_FireExtinguisher.stl	Primary model	3.7 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

BMW Z4 (E85) Fire Extinguisher Bracket

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a bracket to mount a Kidde 3 1/4" Dry Chemical Fire Extinguisher under the driver seat of a BMW Z4 E85 (2003-2008). It re-uses the included bracket from the fire extinguisher, and basically creates a flat mounting surface suitable to bolt onto. The holes are designed for M6 screws. You will need 3x M6 screws at a minimum to secure the bracket to the seat, which has un-tapped holes of that size.