Files (1)

DoubleHookV2.stl

STL

469.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 70%	100% solid	Recommendation
DoubleHookV2.stl	Primary model	469.9 KB STL	Slice file	Slice file	Slice file	Print with a strong material to handle the weight of bags

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Bag hooks for BMW X1 vehicle

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I never really liked the "hook" in the trunk of the BMW X1. I'm used to having a hook to secure bags in my trunk, but the BMW X1 has a very bad hook in the trunk. So logically... I made my own! Best to print using strong material and with a decent infill %. I've used ABS with 80% infill. Also, make sure the material you use can handle heat as well. Parking your car in the sun can get toasty! There's no good printing orientation that allows you to print without supports. I've printed them top side down with supports for the hooks. Worked great on the Prusa MK3S. Just print it, pop it off the plate & throw it over that sad excuse of a hook:) I iterated over several designs to find one that fits on the existing hook without being stuck or being too loose. This design seems to work best for me to be able to quickly remove/place the hooks, without them falling off on their own or when grabbing a bag that was hooked to it.