Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Trunk_filet_hook_v8.stl | Primary model | 108.6 KB STL | Slice file | Slice file | Slice file | Ensure the print bed is level and clean for a secure first layer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Trunk filet hook - BMW X1
Shared by
3DPrintedCarPartDescription
I needed a dedicated trunk filet hook for the car (BMW X1). What a good exercise to learn 3D design and printing;-) This hook does not require screw. It can be attached to the trunk floor without creating holes. The hook are "plugged" on the 4 corners of the floor as shown in the pictures. Nothing specific printing instructions. I did not used support, the result was acceptable without, it's inside a trunk;-) I've used Fusion360 to design it. About 8 prototypes before this final design. Sliced by Cura 4.10 Printed with a Lotmaxx Shark V2.
Compatible Cars
Originally published on thingiverse.com by Richard Lasjunies (rlasjunies) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
