BMW Engine tappet holder (M42b18) - image

Files (1)

bmw_tappet_holder.stl

STL

175.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bmw_tappet_holder.stl	Mount / bracket	175.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

BMW Engine tappet holder (M42b18)

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed a tool to help me fit and remove the tappets to my BMW m42 engine. this is my first go at CAD and designing my own bits, the additional parts are M5x16mm csk screws, M5nuts i had these, and some magnets I got from amazon (First4magnets™ F124N-10 Magnet Expert 12mm dia x 4mm thick x 4.2mm c/sink Neodymium Magnet - 2.5kg Pull).