Files (2)

Car_Clip_Inner.stl

STL

214.5 KB

Car_Clip_Outer.stl

STL

189.5 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Car_Clip_Inner.stl	Clip	214.5 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for exterior use
Car_Clip_Outer.stl	Clip	189.5 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for exterior use

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Bumper Fastener Rivet Clip

0 downloads178 views0 likes

Shared by

Michael Chen

Verified

Description

Reconstructed car body/fender/bumper/panel clip thing 4255488 Tried to make this PLA friendly, but it is too brittle. Better off using stronger filament / resin.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.