Cadillac GM OEM 05-11 STS Wiper Arm Cap - image

Files (2)

wiper-arm-cap-with-nerdy-review-logo.stl

STL

417.5 KB

wiper-arm-cap-with-no-logo.stl

STL

755.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
wiper-arm-cap-with-nerdy-review-logo.stl	Cover / cap	417.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
wiper-arm-cap-with-no-logo.stl	Cover / cap	755.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cadillac GM OEM 05-11 STS Wiper Arm Cap

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed new caps for the wiper arms on my 2007 Cadillac STS and when I saw it was going to cost me $13 + shipping for two of them, I decided to make my own. Designed to fit "Cadillac GM OEM 05-11 STS Wiper Washer-windshield-wiper Arm Cap" However, these caps will fit the wiper arms for most Cadillac models between 2005 and 2011 (not just STS).