Files (5)

2029_panel_clipB2.stl

STL

8.4 MB

2029_panel_clipA2.stl

STL

892.9 KB

combined_panel_clip_print.stl

STL

1.7 MB

2029_panel_clipA.stl

STL

1.1 MB

2029_panel_clipB.stl

STL

9.8 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2029_panel_clipB2.stl	Clip	8.4 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
2029_panel_clipA2.stl	Clip	892.9 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
combined_panel_clip_print.stl	Clip	1.7 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
2029_panel_clipA.stl	Clip	1.1 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
2029_panel_clipB.stl	Clip	9.8 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Car Panel Clip

0 downloads158 views0 likes

Shared by

Michael Chen

Verified

Description

One on Print, One experimental. The "Straight Up" one is poor quality of my RepRap, I may do a re-work which uses 3mm filament to clip it in place. Straight up also broke its pin as I removed it from the bed. D'oh. The V2 is on print now. Try the combined STL. Ok, this was printed successfully and is in my engine bay fine, has been for 8+ months. ....its pink. Makes it easier to see p.s. if you like this car part, why not download (or just view) the other designs I've done:.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files