Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ASA / PETG 20% | ASA / PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Center_Console_latch.STEP | Printable file | 184.3 KB STEP | Slice file | Slice file | Slice file | Ensure proper orientation to minimize supports |
| Center_Console_latch.STL | Printable file | 765.6 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Center Armrest Console Latch, VW MK4, '99-'05 Golf/GTI/Jetta/Borra
Shared by
3DPrintedCarPartDescription
Replacement part for center armrest console latch, as pictured. Should fit many early 2000's VW cars. Requires an 8mm diameter spring of length ~12mm. Recommend printing out of nylon or other high temp plastic.
Compatible Cars
Originally published on thingiverse.com by Bradley Jesteadt (bradstopher99) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
