Center Cap Removal Ring for Tesla Model 3 Aero Wheels - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Center Cap Removal Ring for Tesla Model 3 Aero Wheels

0 downloads27 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I typically don't use my aero wheel covers unless I am going on a road trip. The problem is that it can be difficult to remove the center caps and the covers will not go on while the caps are in place. To make things easier on myself, I designed this simple suction cup holding ring. It is small, stores easily in the glovebox and makes short work of getting the center caps pulled out. Just make certain that the center cap is clean and this tool will pop the cap off with a little tug. Besides the printed ring, you just need an appropriately sized suction cup. I found one that is the perfect size for the job in this assortment pack available on Amazon. Happy building and please post your makes!