CCS_Cover_Part1.stl

STL

37.8 KB

CCS_Cover_Part2.stl

STL

18.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

10g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.25

Filament only at roughly $24/kg PETG / ASA

Print time

18m–29m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CCS_Cover_Part1.stl	Cover / cap	37.8 KB STL	9g $0.23	10g $0.25	23g $0.54	Use PETG / ASA; check sealing faces and verify in slicer.
CCS_Cover_Part2.stl	Cover / cap	18.9 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla Model 3 CCS Cover Silikon Form

0 downloads36 views0 likes

Shared by

Verified

Description

This is a form to cover the European Tesla Model 3 CCS Pins. Fill this form with Silicone. Any might work, very good result with SF45!

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Michi Hans (bash_m) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.