Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| fordKa_to_fellowMove.stl | Primary model | 126.1 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Ensure proper adhesion to prevent part warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
ChatGPT Cupholder Adapter (openscad)
Shared by
Michael ChenDescription
I encountered an issue where my cupholder was too small for my desired cups and bottles. Instead of searching for a ready-made solution, I decided to create a custom cupholder adapter with the help of ChatGPT-4, an AI language model developed by OpenAI. This cupholder adapter is designed to fit into your existing cupholder and expand its size to accommodate larger cups and bottles. The design consists of two parts: a bottom half that fits into the existing cupholder, and a top half that provides the increased inner diameter for larger cups. These two parts are connected by a ring to ensure stability. The parameters of the adapter can be easily customized in the Thingiverse Customizer, allowing you to modify the dimensions to perfectly fit your specific cupholder and desired cup sizes. Special thanks to ChatGPT-4 for assisting in the design and generation of the OpenSCAD code for this cupholder adapter. Give it a try, and feel free to share your results and experiences! Can you generate the openscad code to make a ring with an outer diameter of 70mm?
Print Settings
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
