Chevrolet windshield washer nozzle - image

Files (2)

Below_the_hood.stl

STL

1.6 MB

Over_the_hood.stl

STL

1.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Below_the_hood.stl	Printable file	1.6 MB STL	Slice file	Slice file	Slice file	Print at high resolution (e.g., 0.12 mm) for fine threads
Over_the_hood.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Print at high resolution (e.g., 0.12 mm) for fine threads

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Chevrolet windshield washer nozzle

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Chevrolet windshield washer nozzle. I don't know if it's standard or not and if it fits any other car models. I designed this for my Malibu 2008. * It has pretty fine threads so you wanna print it in high resolution. I printed it at 0.12 mm. * It needs support material but it can be restricted to "Touching Buildplate". * Also, use teflon tape on the threads when installing. Hope this helps! Blaise.