Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| climate_control_panel.obj | Primary model | 69.9 KB OBJ | Slice file | Slice file | Slice file | Ensure proper fit by checking your car's model and the provided model before printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Climate control wood panel for mercedes-benz w123
Shared by
3DPrintedCarPartDescription
Climate control wood panel for Mercedes-Benz w123. It fits my 1982 300D sedan, although the climate control panel varies between models, so it may not fit others. Just make sure to take a good look at your car and the model before printing. The two pins should slide into the two holes behind the panel. I would recommend securing it with some type of epoxy, but the panel should stay put even without it. You are of course going to want your own wood veneer on it, similar to what I have done.
Compatible Cars
Originally published on thingiverse.com by Caden Hutchinson (duberined) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
