Files (4)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| sunvisorclip_lh.STL | Clip | 147.5 KB STL | Slice file | Slice file | Slice file | Ensure correct orientation for optimal support generation |
| sunvisorclip_lh_nosupport.STL | Clip | 143.8 KB STL | Slice file | Slice file | Slice file | Ensure correct orientation for optimal support generation |
| sunvisorclip_rh.STL | Clip | 147.5 KB STL | Slice file | Slice file | Slice file | Ensure correct orientation for optimal support generation |
| sunvisorclip_rh_nosupport.STL | Clip | 143.6 KB STL | Slice file | Slice file | Slice file | Ensure correct orientation for optimal support generation |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Sunvisor Clip Mercedes-Benz w126
Shared by
3DPrintedCarPartDescription
This is a replacement sunvisor clip for a Mercedes-Benz w126 (S-class 1983-1991). The driver-side clip in my 300SE cracked due to age and overuse, so I set about designing a replacement. This clip is not a perfect replica of the original, but is close enough in appearance (especially once installed) to be noticed by only the most discerning eye. It has been designed to function as per the original, and be easy to print easily. Several revisions of the design were tested, and this was the final and best performer. The model comes with some support features, which have proven successful. I have also provided a 'no support' model if required. I recommend for beige or tan interiors such as mine, where finding a matching filament is difficult, to print the clip in black, as this matches many other trim details in the roof panel (e.g. the centre light cluster). No affiliation
Compatible Cars
Originally published on thingiverse.com by George Robinson (grob6k) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
