Side Air Vent for Mercedes 190 W201 - image

Files (3)

Frame.stl

STL

1.1 MB

Horizontal_Bars.stl

STL

1.2 MB

Vertical_Bars.stl

STL

2.4 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Frame.stl	Printable file	1.1 MB STL	13g $0.32	15g $0.35	32g $0.77	Ensure proper orientation in the slicer to minimize supports
Horizontal_Bars.stl	Printable file	1.2 MB STL	14g $0.33	15g $0.36	33g $0.80	Ensure proper orientation in the slicer to minimize supports
Vertical_Bars.stl	Printable file	2.4 MB STL	19g $0.45	20g $0.49	44g $1.07	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Side Air Vent for Mercedes 190 W201

1 downloads205 views0 likes

Shared by

Michael Chen

Verified

Description

Side vent for Mercedes-Benz 190 W201 prepared for 3d printing. The model was created in a way to avoid breaking during assembly. Use glue to put the model together.