Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ClipForLEDLightPipe.stl | Clip | 7.1 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
| ClipForWireRun.stl | Clip | 8.3 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Clips - LED Light Pipe Tube & Wire Holder
Shared by
3DPrintedCarPartDescription
Used these clips to mount a LED light stripe inside a light pipe (silicone tube) to the trunk lid of my MX-5 Miata. 2 sizes. One for the specific light tube referenced in my blog, the other to hold the wiring run from the controller to the LED strip. Specifics can be found here: http://www.plastibots.com/index.php/2021/10/03/finito-mx-5-rear-led-strip-console-controller/
Compatible Cars
Originally published on thingiverse.com by (PlastiBots) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
