Files (4)

nc_camera_ake.stl

STL

79.7 KB

nc_camera_ake_backing.stl

STL

1.1 KB

nc_camera_no_ake.stl

STL

73.2 KB

nc_camera_no_ake_backing.stl

STL

684 B

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
nc_camera_ake.stl	Printable file	79.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
nc_camera_ake_backing.stl	Accessory piece	1.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
nc_camera_no_ake.stl	Printable file	73.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
nc_camera_no_ake_backing.stl	Accessory piece	684 B STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

NC Miata Backup Camera Mount

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a backup camera mount for an NC Miata with the Advanced Keyless Entry (AKE) package. It a derivative design originally posted by "kiddingme". It is designed around the Nakita backup camera and moment buttons available on Amazon. It improves on the original by being simpler to assemble and install. It also just clips on rather than having a base plate that sandwiches the truck sheet metal. I've printed this on an Ender3 and it has some issues with leaving a gap in the backing plate. There are two versions, one with the AKE trunk release button and one without. You'll need to download the appropriate version for your car. Camera: https://www.amazon.com/dp/B07H852D49 Momentary Push Button: https://www.amazon.com/dp/B08JHW8BPV/ Foam Tape: https://www.amazon.com/dp/B08LCWGQV4/