Files (3)

GV_Corrected_and_Reduced.stl

STL

601.1 KB

GV_full_v1.step

STEP

3.4 KB

GV_Solid_v2_Corrected.stl

STL

601.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
GV_Corrected_and_Reduced.stl	Printable file	601.1 KB STL	Slice file	Slice file	Slice file	Use a 0.6mm nozzle or larger for better print quality
GV_full_v1.step	Accessory piece	3.4 KB STEP	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
GV_Solid_v2_Corrected.stl	Printable file	601.1 KB STL	Slice file	Slice file	Slice file	Use a 0.6mm nozzle or larger for better print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Miata GV style tail panel

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Make sure to like, share, remix, and collect! Click on "Thing Files"! File Descriptions (Orientations are out of whack): gv full.stl - original scan, weighs a ton, has a ton of mess - for daring editors only. GV corrected and reduced - simplified and ready to print (kind of)- probably the same as solid v2 corrected. GV full step - not sure if it works, but try it. Supposed to be a solid file. Feel free to mod it and remix it, and definitely repost it. I suggest using at least a 0.6 nozzle to print this, however before even printing it, maybe throw the quad mesh or the step file into fusion360 and mess with it to straighten it out. Post remixes! Headlights: https://www.thingiverse.com/thing:4014792