NB Miata Trunk/Fuel Lid Levers Cover - image

Files (1)

Rear_Levers_Cover.stl

STL

293.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Rear_Levers_Cover.stl	Cover / cap	293.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

NB Miata Trunk/Fuel Lid Levers Cover

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Cover for the cables and bolts that attach to the trunk and fuel cap levers at the rear of the transmission tunnel. Fits using original screws. I didn't have the bed space to make it larger, else I would have made the rear angle larger to better contact the rear firewall. Inspired by: Miata Fuel Pull Cover (NA) thing:4545328 josh7owens.