Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 55% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| tri_chew_v1.stl | Primary model | 98.3 KB STL | Slice file | Slice file | Slice file | High infill is recommended due to high-temperature conditions in a car |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
cowboy canteen center console for 2015+ F150
Shared by
3DPrintedCarPartDescription
This is it, the device you've been wanting since 2015 for your F series truck. we've all struggled to find purpose of this rectangular area of our center consoles but the answer is now among us. - the first one i printed with 20% infill had lead to a total failure when subjected to 108*F outside temps. no idea how hot the interior was, but id guess 125*+. i have since made a successful print with 60% infill. yes this is extreme, but it is recommended for best long term results using PLA or PETG *IF YOU WEAR A MUSTACHE, CLICK BELOW FOR A BETTER OPTION* ------------------------->https://www.thingiverse.com/thing:4591160
Compatible Cars
Originally published on thingiverse.com by Dylan Rush (Rushdylan) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
