Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 2012_F-150_Armrest_Latch_Narrow_reinforced_pins.stl | Primary model | 28.4 KB STL | 9g $0.21 | 10g $0.23 | 21g $0.51 | Ensure a tight fit by possibly sanding down the pins |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford F-150 Lid Latch for center console armrest 2010-2015
Shared by
3DPrintedCarPartDescription
I broke my original latch on my 2012 F-150. I remixed this and made the pins braces a little narrower to make it easier to put in i also removed the 3d printed spring part and reinforced the pins instead this was still a very tight fit you might need to still sand the pins down shorter. might modify more if it breaks in future. A paper clip spring will work but If you have original spring, use that instead. attached is a youtube of how to install the latch i do not own this video. https://www.youtube.com/watch?v=ic1-wjW6yOk
Compatible Cars
Originally published on thingiverse.com by robert hawley (rhawley88) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
