Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | Nylon / TPU / / a similar durable and flexible material 20% | Nylon / TPU / / a similar durable and flexible material 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Daihatsu Cuore Toyota Yaris MY2007 washer water cap
Shared by
3DPrintedCarPartDescription
This is a nice cap as replacement for the original and brittle washer water cap of some Daihatsu / Toyota cars. In my case it was a Daihatsu Cuore from 2007. It should not be printed using ABS or PLA. I was using Taulman Nylon 645 and it works great. You may use any other durable material that is flexible and robust when using in a car environment. But Nylon works great here. Designed to be printed without supports. But for Nylon prints I do recommend a brim for better sticking to the build plate. Print resolution should be less or equal to 0.2mm.
Compatible Cars
Originally published on thingiverse.com by Mark Spencer (MSpencer) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
