Dash Cam Mirror Mount for Fiat Ducato 250/290 - image

Files (2)

Spiegelhalter_Ducato_250_V4.stl

STL

887.7 KB

Spiegelhalter_Ducato_250_V5.stl

STL

1.2 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

33g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.80

Filament only at roughly $24/kg PETG / ASA

Print time

57m–1.6h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Spiegelhalter_Ducato_250_V4.stl	Printable file	887.7 KB STL	27g $0.64	29g $0.69	63g $1.52	Ensure a stable and level print bed for optimal adhesion.
Spiegelhalter_Ducato_250_V5.stl	Printable file	1.2 MB STL	31g $0.73	33g $0.80	73g $1.75	Ensure a stable and level print bed for optimal adhesion.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Dash Cam Mirror Mount for Fiat Ducato 250/290

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Universal Mount e.g. for Dashcam, Fiat Ducato 250/290, uses the original Mount and Ball. Needs M4 Screws and Nuts. Mount with Scotch 3M VHB Tape. Universeller Halter z.B. für eine Dashcam für Fiat Ducato 250/290, es wird der originale Halter inkl. Kugel verwendet. Braucht M4 Schrauben und Muttern. Sehr stabil. Montage mit Scotch 3M VHB Tape.