fiat iphone 6 plus mount on the tomtom plug - supporto iphone 6plus per fiat su supporto tomtom blue&me - image

Files (4)

1.stl

STL

1.4 MB

2.stl

STL

405.7 KB

clip_modified.stl

STL

356.6 KB

inserto.stl

STL

481.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

4 model files

Typical selected file

36g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.85

Filament only at roughly $24/kg PETG / ASA

Print time

1.0h–1.7h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
1.stl	Printable file	1.4 MB STL	33g $0.78	36g $0.85	78g $1.87	Ensure a strong adhesion to the print bed to prevent warping
2.stl	Printable file	405.7 KB STL	20g $0.47	21g $0.51	47g $1.12	Ensure a strong adhesion to the print bed to prevent warping
clip_modified.stl	Clip	356.6 KB STL	19g $0.45	20g $0.49	44g $1.07	Ensure a strong adhesion to the print bed to prevent warping
inserto.stl	Printable file	481.3 KB STL	21g $0.50	23g $0.54	50g $1.19	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

fiat iphone 6 plus mount on the tomtom plug - supporto iphone 6plus per fiat su supporto tomtom blue&me

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

iphone 6 plus mount on the tomtom plug for fiat - sostegno per iphone 6 plus su mix di 2 elementi trovati su thingiverse, aggiunto anche un secondo supporto con sistema di bloccaggio, anch'esso adattato.