Dodge Challenger Passenger Seat Belt Insert Cover - image

Files (2)

Passenger_Buckle_Cover_Part_A.STL

STL

585.1 KB

Passenger_Buckle_Cover_Part_B.STL

STL

506.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Passenger_Buckle_Cover_Part_A.STL	Cover / cap	585.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Passenger_Buckle_Cover_Part_B.STL	Cover / cap	506.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Dodge Challenger Passenger Seat Belt Insert Cover

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

If your passenger seat belt (2009 Challenger, or similar) has been slammed in the door and the plastic trim has broken...Use this! It contains two parts (A and B) which fit together and are secured with two small, flathead screws. It is a bit wider than the original to accommodate the screws, but no one has ever noticed. I designed this part from the scraps of the broken original.