DVD player holder with VESA 75 mount for TESLA Model 3 - image

Files (9)

Crochet_sup.STEP

STEP

43.7 KB

Crochet_sup.stl

STL

107.1 KB

Insert.STEP

STEP

79.8 KB

Insert.stl

STL

146.5 KB

Insert_symetrique.STEP

STEP

79.6 KB

Insert_symetrique.stl

STL

146.4 KB

Kit.stl

STL

1.1 MB

Support.STEP

STEP

290.0 KB

Support.stl

STL

581.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

9 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Crochet_sup.STEP	Printable file	43.7 KB STEP	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Crochet_sup.stl	Printable file	107.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Insert.STEP	Printable file	79.8 KB STEP	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Insert.stl	Printable file	146.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Insert_symetrique.STEP	Printable file	79.6 KB STEP	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Insert_symetrique.stl	Printable file	146.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Kit.stl	Printable file	1.1 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Support.STEP	Printable file	290.0 KB STEP	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Support.stl	Printable file	581.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

DVD player holder with VESA 75 mount for TESLA Model 3

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

It is an holder for DVD player or tablet with the VESA 75x75 standard which mounts behind the seats of the TESLA Model 3. The central hole is for the photo standard screw and the four others are is for the VESA 75x75 mount. You can use this VESA holder for exemple: https://www.amazon.fr/dp/B074N4GDY6/ref=cm_sw_em_r_mt_dp_U_I-naEbWE4QBF3 The small inserts pass behind the rigid plastic plate and the large hooks are fixed on the headrest pins. It is necessary to glue a piece of felt 1mm thick to protect the plastic of the car. You must add the following: - Two 3x10mm thermoplastic screws - Two M4 nuts - Two M4x12 screws - Two M4 washers.

Compatible Cars

Tesla Model 3

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Vincent ROBERT (vince_007) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.