Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BloqueoTesla.stl | Primary model | 92.4 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for optimal strength and minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 rear seats interior lock
Shared by
3DPrintedCarPartDescription
These are just a simple locks to keep the metal hooks inside the boot from moving (and, in this way, preventing thiefs from accessing the boot by breaking the window glass). Unlike other locks, it doesn't require a complex mechanism nor it requires/can be removed with a specific tool. There are two different shapes in order to accommodate the lock in the diferent hooks from the left and the right side. There is still room for improvement in the design but with the current one, if well-positioned, I didn't managed to move it out of place no matter how much I moved the handle/seat. A layer height of 0.2 mm is more than enough for it to work. This is a video showing the placement of the locks, it was taken laying on the floor of the trunk and looking upwards: https://youtu.be/H_TjTCkKwSA
Compatible Cars
Originally published on thingiverse.com by Óscar Ródenas (rodenas) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
