Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tesla Model 3 RHD Foot Rest

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Tesla Model 3 RHD Drivers Foot Rest 3D Printed Drivers Foot Rest for Right Hand Drive TESLA Model 3 Simple thin foot rest ideal for long drives while on Cruise Control or FSD / Full Self Drive. NON-DESTRUCTIVE installation - Secured in place using screws between Foot and printed Tabs that will slide/rotate BEHIND the cars plastic side wall cover. No Drilling. Short screws will suffice. Works with 1 or 2 screws/tabs to secure. Works with most floor mats. NOTE: It will move about a little, it will not friction lock to the side wall. But thats not been a problem for me, I've been using this Foot Rest now for 1 year. It may seem too thin, but its a good compromise between (not) getting in the way when using the accelerator and enough edge to rest your foot on. (Dont know if it would fit Model Y) WARNING - Use at your own risk! Recommend PRACTICING moving your foot ACROSS 2/TWO PEDALS for Emergency Stops. AVOID accidently hitting the accelerator! (I recommend Obstacle Aware Acceleration safety feature - Switch It On!) And yes, its the BEST CAR ever, hands down. Thanks for checking;).