tesla_homelink_bracket_v4.stl

STL

905.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tesla_homelink_bracket_v4.stl	Mount / bracket	905.5 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla M3 DIY Homelink Bracket

0 downloads37 views0 likes

Shared by

Verified

Description

Tesla M3 HomeLink Module Install - DIY 1. Acquire a 2019 HomeLink module, $150 eBay example, http://bit.ly/homelink_module_ebay. - DO NOT pay more than $150, else it's cheaper to simply buy a new $300 module, https://shop.tesla.com/product/automatic-garage-opener - See required 30 minute (mobile) service call below. 2. Remove the frunk, http://bit.ly/frunk_removal. 3. 3D print custom HomeLink bracket - 3D STL model ready to print, http://bit.ly/homelink_bracket. - Example online 3D printing service, http://bit.ly/example_3D_printing_service. - Mounting bolt, http://bit.ly/homelink_module_mounting_bolt. 4. HomeLink hardware module installation - Part# 114984-00-B - YouTube video of the hardware installation, less than 15 minutes (including frunk removal), http://bit.ly/tesla_m3_homelink_module_install - Unclear why Tesla techs removed the front bumper with all its' sensors. That complexity (and effort) is not required, http://bit.ly/overly_complex_module_install. 5. Install, activate and configure HomeLink module firmware/software - Tesla indicates a minimum 30 minute mobile service call ($97) is REQUIRED, http://bit.ly/tesla_service_north_america - Not very DYI and unnecessary, rolling a mobile tech for something as simple as software activation is ludicrous. - PLEASE apply push back on Tesla's service chain to make this step an online, over-the-air activation.

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Richard Hovey (rhovey) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.