Files (2)

Simple.stl

STL

323.7 KB

Tapado_dejando_huecos_para_las_pinzas.stl

STL

324.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

20g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.47

Filament only at roughly $24/kg PETG / ASA

Print time

33m–56m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Simple.stl	Printable file	323.7 KB STL	18g $0.43	20g $0.47	43g $1.03	Ensure the model is oriented to minimize supports in your slicer.
Tapado_dejando_huecos_para_las_pinzas.stl	Printable file	324.8 KB STL	18g $0.43	20g $0.47	43g $1.03	Ensure the model is oriented to minimize supports in your slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Easy Phone Holder Fiat Fiorino

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Esta pieza es para sustituir la tapa de la salida de aire y obtener un mejor agarre para los soportes para mobiles que enganchan en las rejillas de las salidas de aire.