Einsätze Volkswagen T4 Transporter Ladefläche - Mutter M6 und Öse - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Einsätze Volkswagen T4 Transporter Ladefläche - Mutter M6 und Öse

0 downloads43 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Ich habe für die Ausstanzungen in der Dachreling im Innenraum beim T4 Einsätze entworfen, die man einklippen kann, sodass dort je nach Design eine Schraube eingedreht oder ein Strick eingeführt werden. I designed this two Inlays for the VW T4. In the Back underneath the roof are some holes, where you can plug these things in. You can use the model with the screw or the one where you can add a rope.

Compatible Cars

Volkswagen Transporter

Published Jun 29, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by zuppi zupp (PIXELPIONIERE) · License: CC BY-NC-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.