Volkswagen Transporter T5 Handbreak Cover (Quicky) - image

Files (1)

VW_T5_Handbreak_Cover.stl

STL

309.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VW_T5_Handbreak_Cover.stl	Cover / cap	309.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Volkswagen Transporter T5 Handbreak Cover (Quicky)

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Our dog kept on disabling the handbreak sensor, causing hanbreaks alarms while driving that needed to be fixed on the side of the road. I made a quick cover for it. It doesn't look that great, but it works, and it has a bonus pocket space to store little things in like tickets. Made from Colorfab PETG (XT). Print upside down, with a little bit of support.