Ford 6.5" door speaker adapter ring - image

Files (2)

adapter_ring.stl

STL

809.7 KB

adapter_ring_slotted.stl

STL

811.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 20%	100% solid	Recommendation
adapter_ring.stl	Printable file	809.7 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer
adapter_ring_slotted.stl	Printable file	811.7 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Ford 6.5" door speaker adapter ring

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I recommend printing this with PETG, maybe ABS, PLA is not a good idea due to heat and it's tendency to sag/ warp, it does not NEED supports, all overhangs are hidden. 20 ish % infill +/- with 3+ perimeters is recommended, but I won't tell you how ti live your life. This is made to fit my 2016 Focus ST, but it'll likely fit many more cars. One is slotted for wires, the other you can make your own with a dremel or drill. loosely based off Metra 825605 It wasn't designed to use as little filament as possible, it was designed for long term strength.