Ford Explorer (5th Gen) Speaker Spacers - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Ford Explorer (5th Gen) Speaker Spacers

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Made because off the shelf spacers for the 5th gens dont work for the 2016-2019 explorers. You will need supports touching build plate. I have a split version and a full front door spacer so that you can fit it on your build plate. i just used super glue to put them together, then hot glue around the seam to seal it. there is clearance for weather strip on the back and behind the speaker. I used a.8mm nozzle to print. Use plenty of walls and top and bottom layers.