Ford Transit Overhead Console insert preview

Files (1)

Ford Transit Overhead console light insert.stl

STL

419.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford Transit Overhead console light insert.stl	Primary model	419.5 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment by checking the console's dimensions

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Ford Transit Overhead Console insert

0 downloads67 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability in a vehicle environment

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between weight and strength

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

I wanted to add a light switch in my campervan. This moves the square switch to the side, and makes space for another switch. Printed using the filament below, which matches the color very well. (even better in real life than the photo shows). Polymaker Matte PLA Filament 1.75mm Muted White Filament, 1.75 PLA 3D Printer Filament 1kg- PolyTerra 1.75 PLA Filament Matte Muted White 3D Printing Filament, Color: 025-1kg Muted White (Hex Code: #Bfbcb1).