Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ford_windstar_vent_arm_01c.stl | Primary model | 505.0 KB STL | 21g $0.51 | 23g $0.55 | 51g $1.21 | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Windstar vent arm (rear window part)
Shared by
3DPrintedCarPartDescription
On my 1998 Ford Windstar the rear windows have a mechanism for opening and closing them slightly. Ford calls it a "vent". Anyway, the part, a little arm broke so this is a perfect replacement part meaning it fits and works perfectly. If I remember correctly all Windstars from 1995 to 1998 use this same part.
Compatible Cars
Originally published on thingiverse.com by Maxim Hurwicz (Maximpulse) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
