Files (1)

Glove_box_handle_VW_Golf.STL

STL

475.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Glove_box_handle_VW_Golf.STL	Primary model	475.2 KB STL	Slice file	Slice file	Slice file	Check orientation in slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Glove box handle VW Golf

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a glove box handle made by my friend Simonksi for his car: volskwagen golf gti 1997's. Jus in case the hadle breaks, here you have a replacement. I've printed it without supports, so the letters at the front of the piece are not fully legible. However the model still works good.